打膠機的日常保養你懂得多少
How much do you know about the daily maintenance of the glue machine?
1.首要我們要清楚的是打膠機是一個看上去體型較大，可是里邊十分精密的東西。所以為了能讓它堅持更好的狀況，日常的保護和保養必定是必不可少的。
1. The first thing we need to know is that the gluer is a very sophisticated thing that looks big. Therefore, in order to make it stick to better conditions, routine protection and maintenance must be essential.
2.根本的每天清潔必定要做到，每天把作業臺面進行整理，能夠用柔軟的布擦一下，堅持整齊，確保傳感器能正常辨認。
2. Fundamental daily cleaning must be done, every day to clean the work table, can wipe with a soft cloth, adhere to neatness, to ensure that the sensor can be recognized properly.
3.下班之前承認里邊還有沒有膠，要把膠排順利。還有一個就是查看看看膠槍是否阻塞，假如阻塞及時整理，有利于問題的及時處理。
3. before you go to work, admit that there is still no glue inside. Another is to check to see if the rubber gun is blocked. If the blockage is sorted out in time, it is conducive to the timely handling of the problem.
4.為了避免密封圈老化、變形，能夠守時用硅油對打膠機進行清洗保養，這樣能更好的延伸密封圈的使用壽命。
4. In order to avoid the aging and deformation of the sealing ring, the rubber beater can be cleaned and maintained with silicone oil on time, which can better extend the service life of the sealing ring.
5.牢記的是不要作業人員自己隨意調理壓力表等，那樣或許會影響膠，會形成打膠質量和設備問題。
5. Keep in mind that the operator should not adjust the pressure gauge at will, which may affect the glue, the quality of the glue and equipment problems.
6.要守時查看打膠機上面螺絲是否松動，接頭有沒有漏氣現象。假如一旦發現問題及時上報，及時修理，確保生產和安全問題。
6. watch the time to see whether the screw on the gluing machine is loose, and whether there is any leakage in the connector. If the problem is reported in time, timely repair should be made to ensure production and safety.

7.在換膠進程中必定要細心，要把里邊的空氣排潔凈，不然里邊的硅膠固話設備很簡單損壞，也很影響打膠質量。
7. In the process of changing glue, care must be taken to clean the air inside. Otherwise, the silica gel fixed-line telephone equipment inside will be easily damaged, which will also affect the quality of gelatinizing.
8.現在小編能想到的只要這么多了，假如我們還想起了一些關于打膠機保養問題，歡迎我們和小編一起來評論。
8. Now Xiaobian can think of as long as so many, if we also think of some problems about glue machine maintenance, welcome to comment with Xiaobian.
9.沖刷混膠器或許膠嘴時，必定要記得把膠嘴里邊的膠放出來用接膠板接住，以免污染設備。
9. When flushing the rubber mixer or the rubber nozzle, it is necessary to remember to release the glue inside the rubber nozzle and catch it with a splice board so as to avoid contaminating the equipment.
10.操作參數時，必定要根據需求的尺度來設定數值，不要自己隨意的設定，避免操控器發出錯誤信息，損壞設備。
10. When operating parameters, it is necessary to set the values according to the scale of the demand. Do not set them arbitrarily by yourself, so as to avoid the misinformation from the controller and damage the equipment.
11.在打膠時必定不要松懈哦，要扶好玻璃。避免玻璃脫位，即影響漂亮又影響打膠質量。
11. do not slacken when making glue. Avoid glass dislocations, that is, affect the beautiful and affect the quality of glue.
12.在沖刷膠嘴、混膠器時，必定要先翻開膠嘴操控閥門，然后在翻開供膠機，避免因壓力劇增損壞設備或許呈現安全事故。
12. When flushing rubber nozzles and mixers, it is necessary to turn on the rubber nozzle control valve first, and then turn on the rubber feeder, so as to avoid the equipment damage caused by the sharp increase of pressure or safety accidents.
13.在機頭前方檢測玻璃開關的光眼上不被膠堵住，一旦堵住絕對會耽誤作業。
13. Inspecting the glass switch in front of the nose is not blocked by glue. Once blocked, it will definitely delay the operation.
14.剩下的就是在日常作業中需求留意的一些小的點，可是仍是不能掉以輕心。比方，在膠嘴和兩邊的刮膠板上假如膠比較多時，要及時整理潔凈。
14. What remains is some small points that need to be noticed in daily work, but still can not be taken lightly. For example, if the glue is on the gum and the scraping boards on both sides, it should be cleaned in time.
15.吸盤上不要放雜物，一起要及時整理。要不或許呈現問題都找不著人來修了呢。
15. do not put litter on the sucker. Or you can't find anyone to fix it.
綜上所述有濟南昌盛機械提供，想了解更多雙組份打膠機知識，歡迎關注我們的網站：http://linshi.jncsjx.com謝謝支持！
In summary, all the above-mentioned Jinan Changsheng Machinery provides, want to know more about the two-component glue machine knowledge, welcome to pay attention to our website: http://linshi.jncsjx.com Thank you for your support!