丁基膠涂布機性能特點：
Performance characteristics of butyl rubber coater:
1、丁基膠涂布機選用人機界面顯示屏便于操作，系統以PLC操控，由光電傳感PLC機、中文操控終端、PLC自動轉化。按鈕開關等電器元件組成，功能強壯、作業牢靠、操作簡略自動化程度較高。
1. The butyl rubber coater adopts man-machine interface display screen for easy operation. The system is controlled by PLC and automatically transformed by photoelectric sensor PLC machine, Chinese control terminal and PLC. It is composed of button switch and other electrical components, with strong function, reliable operation, simple operation and high degree of automation.
2、丁基膠涂布機選用目前國內較大缸徑膠缸，裝膠容量大，很大程度上保證連續出產時間，行進作業功率。選用較氣動增壓系統，充沛保證膠頭出膠壓力衡定，避免了打膠粗細不勻，斷膠現象。選用4段變頻調速，很大程度上照顧操作工人熟練程度，行進作業功率。
2. Butyl rubber coater adopts the rubber cylinder with large cylinder diameter in China, with large rubber loading capacity, which ensures continuous production time and traveling operation power to a great extent. The more advanced pneumatic pressurization system is selected to fully ensure the constant glue outlet pressure of the glue head and avoid uneven glue thickness and glue breaking. 4-stage frequency conversion speed regulation is selected to take care of the proficiency of operators and the traveling operation power to a great extent.

3、丁基膠涂布機為中空玻璃出產的首要設備，為半自動膠條涂布機，即人工持鋁間隔框進行操作，將鋁間隔框放在傳送帶上，人工持鋁間隔框隨傳送帶作業，當鋁間隔框經過傳感器時，傳送壓輪及打膠閥將按設定程序自動作業，即氣缸動作，壓輪壓下，壓送鋁間隔框進行;待鋁間隔框抵達打膠頭時初步打膠，將膠均勻地涂在鋁間隔框上，當間隔框另一側快要抵達壓輪時，壓輪抬起，離開打膠頭時，膠閥自動間斷打膠。
3. Butyl adhesive coater is the primary equipment for insulating glass production. It is a semi-automatic adhesive strip coater, that is, manually holding the aluminum spacer frame for operation, placing the aluminum spacer frame on the conveyor belt, and manually holding the aluminum spacer frame works with the conveyor belt. When the aluminum spacer frame passes through the sensor, the transmission pressure wheel and glue valve will operate automatically according to the set procedure, that is, the air cylinder acts, the pressure wheel is pressed down, and the aluminum spacer frame is pressed for operation; When the aluminum spacer frame reaches the gluing head, apply the glue evenly on the aluminum spacer frame. When the other side of the spacer frame is about to reach the pressure wheel, the pressure wheel will lift up. When it leaves the gluing head, the glue valve will automatically apply glue intermittently.
4、主要功能有：
4. The main functions are:
(1)膠頭、膠缸自動加熱功能;
(1) Automatic heating function of rubber head and rubber cylinder;
(2)任意設置自動加熱時間;
(2) Set the automatic heating time arbitrarily;
(3)無膠報警提示;
(3) No glue alarm prompt;
(4)在手動狀態下可打圓弧;
(4) Arc can be made in manual state;
(5)自動待機功能：減少工人值守時間，行進作業功率。
(5) Automatic standby function: reduce workers' duty time and travel operation power.
5、丁基膠涂布機選用不銹鋼作業臺面，充沛保證設備外觀及收拾便當。
5. The butyl rubber coater adopts stainless steel working table to fully ensure the appearance of the equipment and easy cleaning.
以上就是為大家介紹的有關雙組份打膠機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.xyspace.net
The above is a detailed introduction to the two-component gluing machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.xyspace.net