中空玻璃膠機分為兩部分膠機，單部分膠機，和丁涂膠機，不同膠機的使用不一樣，下面給大家解釋一下。
　　Hollow glass glue machine is divided into two parts, single part glue machine, and Ding glue machine. Different glue machines are used differently. Let's explain.
　　在未來的中空玻璃,中空玻璃膠的使用機器,因為玻璃后的中空玻璃膠密封或結構完整性的影響,但在日常使用的過程中不得不承認,中空玻璃的確是一個很好的建筑材料,密封和隔音性和外部受力性能的性能很好。
　　In the future, the application machine of insulating glass and insulating glass glue will be affected by the sealing or structural integrity of insulating glass glue behind the glass, but in the process of daily use, we have to admit that insulating glass is indeed a good building material, with good sealing and sound insulation and external stress performance.
　　中空玻璃膠機是一種常用何時使用膠水,但隨著使用膠水的選擇根據不同的情況下,我們經常看到一個硅橡膠,和玻璃膠、硅膠等,在日常使用中通常使用膠機將膠直接注入汽缸內兩種不同的材料,然后使用一定比例后需要通過定量泵匹配、混合和定量后,注入到產品的使用中空玻璃膠機,但由于一般中空玻璃密封膠機膠使用一些非常大的膠水粘度,所以操作要求非常高,這是非常困難的,所以在使用中空玻璃密封膠機操作和一般膠水機是不同的,中空玻璃膠機工作時主要根據客戶提供膠水桶操作規范,和定制的壓力板等,在通過壓力板膠膠,壓盤設置活塞泵和齒輪泵,以上這些都是在準備膠客戶使用時只需要把塑料桶在壓盤機。

　　Hollow glass glue machine is a kind of glue that is often used by professionals. However, with the selection of glue, we often see a silicone rubber, glass glue, silica gel, etc. in daily use, we usually use glue machine to directly inject glue into two different materials in the cylinder. After using a certain proportion, we need to match, mix and quantify through quantitative pump, The hollow glass glue machine is used to inject into the product, but because the general hollow glass sealant machine glue uses some very large glue viscosity, the operation requirements are very high, which is very difficult, so the operation of the hollow glass sealant machine is different from that of the general glue machine. When the hollow glass glue machine works, it is mainly based on the operation specifications of the glue bucket provided by the customer, and the customized pressure plate, etc, Through the pressure plate glue, the pressure plate is equipped with piston pump and gear pump, all of which are only needed to put the plastic barrel in the pressure plate machine when preparing the glue customer for use.
　　中空玻璃膠機使用時一般根據膠水的性能可分為單組分中空玻璃膠機和中空玻璃雙組份膠機,單租一膠機,這種膠水機是一種簡單的設備,使用的過程相對簡單,只需要用一個壓盤將某個組件膠取出,然后到產品里面。
　　Hollow glass glue machine can be divided into single component hollow glass glue machine and hollow glass two-component glue machine according to the performance of glue. Single rent one glue machine. This glue machine is a kind of simple equipment. The use process is relatively simple. Only one pressure plate is needed to take out a component glue and then put it into the product.
　　還有一種是一種雙組分膠機器,原理我們知道,幾乎是雙液點膠機,在工作的時候可以根據客戶的要求定制,壓盤、壓盤需要兩個,然后把兩個自定義膠筒壓盤下,準備和后壓盤壓力膠配比和混合定量泵,所有完成內部膠產品在未來。
　　The other is a two-component glue machine. As we know, it is almost a two-liquid dispensing machine. When it works, it can be customized according to the customer's requirements. The pressure plate and the pressure plate need two. Then, under the two customized rubber cylinder pressure plates, prepare and mix the pressure glue ratio of the rear pressure plate and the quantitative pump for mixing. All finished internal glue products will be in the future.
　　現在市面上的中空玻璃膠機普遍采用的方式更多的活塞在鬧情緒的,因為語言是活塞膠有一個的煙橡膠的過程,但也經常因為操作不準確在中空玻璃膠機、膠線變得不均勻,容易出現或大或小,所以在開發和研究后,中空玻璃能夠連續膠膠機,精度和操作很多,和膠水線也變得更加均勻,基本上不會在大型和小型的事件,并按照使用時間的比值來匹配的使用情況來匹配,除了手持噴膠槍的操作還需要幫助,你也可以使用手動操作。
　　At present, more and more pistons in the market are in a mood, because the language is that the piston glue has a professional process of smoke rubber, but also often because the operation is not accurate in the hollow glass glue machine, glue line becomes uneven, easy to appear or large or small, so after the development and research, the hollow glass can continuously glue machine, with a lot of precision and operation, And glue water line also becomes more even, which will not be matched in large and small events, and according to the ratio of use time to match the use situation. Besides the operation of hand-held glue gun, you can also use manual operation.
　　以上就是雙組份打膠機對中空玻璃膠機膠水的使用特點的詳細介紹，想要了解更多請點擊官網http://www.xyspace.net
　　The above is a detailed introduction of the use characteristics of the two-component glue applicator for the hollow glass glue applicator. To learn more, please click http://www.xyspace.net