中空玻璃主動打膠機打膠技巧
Glue beating technique for hollow glass active glue machine
許多人覺得中空玻璃主動打膠機操作起來很簡單，看起來并沒有什么難度。其實每一臺機械都會有正確的運用方法和小技巧。就想咱們平常開車相同，作為一名新司機，你開車必定不像老司機那樣流通靈敏。原因不光是老司機的熟練度，還有開車的一些技巧和實戰得出來的經歷。所以這些技巧仍是很有必要的。
Many people think that the hollow glass active glue machine is very simple to operate. It doesn't seem to be very difficult. In fact, each machine will have the correct use of methods and tricks. Just like we usually drive the same car, as a new driver, you must not drive as fast as the old driver. The reason is not only the proficiency of the old drivers, but also the skills of driving and the experience gained from actual combat. So these skills are still necessary.
在運用前后必定要記住清潔潔凈。尤其是在運用結束后。打膠機結構雜亂，分紅兩個部分，供膠機和打膠機。供膠機里面會放上中空玻璃所需求的兩種膠，通過供膠管傳送到打膠機上面，然后才能夠完美的打膠。假如在運用結束后沒有清潔，讓供膠機、供膠管里充溢的膠，那么下次在想運用，或許就不會這么容易了。弄不好供膠管現已被堵死了，給作業增添了巨大的費事。清潔是為重要的。
Always remember to clean and clean before and after use. Especially after the end of application. The machine is divided into two parts: the glue machine and the glue machine. Inside the glue feeder, two kinds of glue required for hollow glass will be placed, which will be transferred to the glue beater through the glue feeding tube, and then the glue can be perfectly glued. If there is no cleaning after the end of operation, let the glue in the glue feeding machine and the glue filling tube, then the next time you want to use it, maybe it will not be so easy. Failing to supply the hose is now blocked, which adds enormous trouble to the homework. Cleanliness is the most important.

接下來再說一個，關于中空玻璃主動打膠機的運用小技巧。咱們知道中空玻璃主動打膠機的功率仍是很高的，比較人工打膠節省了許多的人力物力。可是許多客戶不滿足，回去之后想在進步功率，把速度提快。可是，那樣起到了反作用，呈現各式各樣的問題，反而降低了速度。之前筆者也說過，廠家預設的參數值是合適的，也是能夠讓中空玻璃主動打膠機保持在好的一個數值。假如真的參數不合適在恰當調整，不要隨意調整參數。
Next, let's talk about the use of hollow glass active glue machine. We know that the power of the active gluing machine for hollow glass is still very high, which saves a lot of manpower and material resources compared with manual gluing. But many customers are not satisfied. After going back, they want to improve their power and speed up. However, it was counterproductive, presenting all kinds of problems, but reduced the speed. The author has said before that the preset parameters of the manufacturer are the most appropriate and can keep the active gluing machine of hollow glass at the best value. If the true parameters are not appropriate, adjust them appropriately, and do not adjust the parameters at will.
終一點很重要也是十分要害的，假如在裝置購買中空玻璃主動打膠機時，必定要注意問一下裝置師傅一些細節問題。比方小零件或許大部分怎樣保養，運用時要如何做，清潔如何做等等。這些細節問題不行小覷，未來往往被這些小問題難倒。
Ultimately, it is very important and crucial. If the device purchases an active gluing machine for hollow glass, it is necessary to pay attention to some details of the device master. For example, how to maintain small parts, how to do it, how to do it and so on. These details can not be underestimated, and these problems are often hard to come by in the future.
綜上所述有濟南昌盛機械提供，想了解更多雙組份打膠機知識，歡迎關注我們的網站：http://www.xyspace.net謝謝支持！
In summary, all the above-mentioned Jinan Changsheng Machinery provides, want to know more about the two-component glue machine knowledge, welcome to pay attention to our website: http://www.xyspace.net Thank you for your support!