中空玻璃全自動生產線的維護與保養工作是我們需要長期關注的一項工作，只有維護保養好了中空玻璃設備，我們才能夠減少工作中不必要的麻煩。對機器進行日常維護及保養是非常重要的事情，平時要經常觀察機器的運動部分、水路系統、風路系統、電器系統，遇有異常情況，立即停車檢查。

The maintenance and upkeep of the fully automatic production line for insulated glass is a task that we need to pay long-term attention to. Only by maintaining the insulated glass equipment well can we reduce unnecessary troubles in our work. Daily maintenance and upkeep of the machine is very important. It is important to regularly observe the moving parts, water system, air system, and electrical system of the machine. If there is any abnormal situation, stop the machine immediately for inspection.

一、傳動系統的維護

1、 Maintenance of transmission system

各傳送輥軸承、毛刷輥軸承、傳送軸承、鏈輪、齒輪定期加鈣基潤滑脂;減速機每半年更換50#-70#齒輪油一次。

Regularly add calcium based lubricating grease to each conveyor roller bearing, brush roller bearing, conveyor bearing, sprocket, and gear; Replace the 50 # -70 # gear oil of the reducer every six months.

二、風路系統的維護

2、 Maintenance of air duct system

定期檢查風機的運行情況，遇有異常聲音時立即停機檢修。定期清洗進風口的過濾柵，減小吸風阻力，提高風干后玻璃表面的潔凈度。

Regularly check the operation of the fan, and immediately shut down for maintenance in case of abnormal sounds. Regularly clean the filter grille at the air inlet to reduce suction resistance and improve the cleanliness of the glass surface after air drying.

三、水路系統的維護

3、 Maintenance of waterway system

中空玻璃生產線清洗段所用水是循環使用的，應及時更換水箱中的存水，以保證清洗用水的質量。水的質量直接影響干燥后玻璃表面的潔凈度。此外，建議每月清洗一次水箱，經常檢查噴水管噴水情況，有堵塞應及時清理。

The water used in the cleaning section of the insulated glass production line is recycled, and the stored water in the water tank should be replaced in a timely manner to ensure the quality of the cleaning water. The quality of water directly affects the cleanliness of the glass surface after drying. In addition, it is recommended to clean the water tank once a month, regularly check the water spraying situation of the spray pipe, and promptly clean any blockages.

四、氣路系統的維護

4、 Maintenance of pneumatic system

過濾器定期放水，油霧器加油，定期檢查空壓機運行情況，如有異常聲音應立即停機檢查。保證系統壓力控制在

Regularly drain water from the filter, add oil to the mist filter, and check the operation of the air compressor regularly. If there is any abnormal sound, stop the machine immediately for inspection. Ensure system pressure is controlled within

五、電器元件的維護

5、 Maintenance of electrical components

工作環境對電器元件的影響很大，由于長期使用以及溫度、濕度、振動、塵土等環境的影響，其性能都會有一些變化。所以一定要保持工作環境的相對恒定并定期檢測、維護，這樣能延長機器的使用壽命，并減少因突然故障造成的生產損失。

The working environment has a significant impact on electrical components, and their performance may vary due to long-term use, as well as environmental factors such as temperature, humidity, vibration, and dust. So it is necessary to maintain a relatively constant working environment and regularly inspect and maintain it, which can extend the service life of the machine and reduce production losses caused by sudden failures.

本文由中空玻璃加工設備提供技術支持，更多的詳細精彩內容請點擊我們的網站 http://www.xyspace.net ，我們將會全心全意為您提供滿意的服務。

This article provides technical support from insulated glass processing equipment. For more detailed and exciting content, please click on our website http://www.xyspace.net We will wholeheartedly provide you with satisfactory service.