雙組份打膠機在實際使用的過程當中會多多少少的出現一些磨損的情況，關于這樣的一類磨損完全沒有辦法給它們進行分類，可以從整體的角度來講給他們進行歸納，比如可能對磨損有著一系列的表現，像是膠和磨損擦傷的磨損，另外一個就是根據摩擦的原理，分為粘著磨損，疲勞磨損以及腐蝕磨損等等。
There is no way to classify such kind of wear. It can be summarized from the overall point of view. For example, wear may have a series of performance, such as the wear of glue and abrasion, and the other is based on the principle of friction. For adhesion wear, fatigue wear, corrosion wear and so on.
如果是雙組份打膠機出現的粘著磨損，那么這樣的一種模式，他們本身就是在整個生產線工作的過程中切削力的作用下所表現出來的，整個摩擦表面的一些不同的吸附膜，會多多少少地遭到不同程度的破壞，讓他們表面的輪廓，在相互作用之下會發生一系列的冷焊，因為相對運動，因此，這樣的一種模式本身就會讓材料從一端走向另一端，而且，它會形成一種磨損，不過在這樣一個過程當中，有的時候材料也會附著在原本的表面，在這種情況之下會出現逆轉轉移的現象，或者是說整個表面會成為一種游離的顆粒，負載的越大，表面的溫度也是越高的，而且他們的形象也往往是越嚴重的。
If the adhesive wear of the two-component glue beater occurs, then such a mode, which is itself manifested under the action of cutting force in the whole production line, will be more or less destroyed by different adsorbing films on the whole friction surface, so that their surface contours will be damaged in varying degrees, and a series of cold welding will occur under the interaction. Because of relative motion, such a mode itself will make the material move from one end to the other, and it will form a kind of wear and tear, but in such a process, sometimes the material will adhere to the original surface, in this case there will be reverse transfer phenomenon, or the whole surface will become a free particle, the load will be more. The higher the surface temperature is, the more serious their image is.
通常來講，這樣的磨損會對運動咬符有一定的影響，整個運動往往是在磨損之間的一種表現形式，而且為了減輕原本的磨損，完全可以采取如下措施，比如，可以合理的去選擇一些不同的材料，相對于金屬的一些材料來講，他們更加容易粘著的，而且新的材料相對于塑形的材料來說，他就有著超強的抗粘著的能力，他們都可以用這些不同的材料來進行表面性的處理，在實際處理的過程當中，也可以通過電動或者是噴涂的方式對他們進行全面的處理，除此之外，他們也可以對所有的摩擦問題的表面進行一定的溫度控制，采用一些不同的潤滑劑來進行添加，而且，具有著超強的控制壓力。

Generally speaking, this kind of wear will have a certain impact on the motion bite. The whole movement is often a form of expression between wear and tear. In order to reduce the original wear, the following measures can be taken. For example, different materials can be selected reasonably. Compared with some metal materials, they are easier to adhere to, and the latest material phase. For plastic materials, he has a super anti-adhesion ability, they can use these different materials for surface treatment, in the actual process, they can also be treated by electric or spraying methods, in addition, they can also control the temperature of all the surface friction problems, mining. It is added with some different lubricants and has super control pressure.
如果雙組份打膠機表面產生一些疲勞磨損的話，那么在整個應變能力接觸的情況之下，往往就會有其他的一些磨損的強度，在摩擦的表面多多少少的都會有一定的深度，而且它有著疲勞的裂紋，隨著整個裂紋之間的相互連接，金屬微粒往往會從表面開始有所脫落，甚至整個表面會出現一些麻點的情況，為了提高表面的疲勞壽命，一定要合理利用。
If some fatigue wear occurs on the surface of a two-component glue beater, then under the condition of contact of strain capacity, there will be some other wear strength. The surface of friction will have a certain depth, and it has fatigue cracks. With the interconnection of the whole cracks, metal particles will often begin to fall off from the surface. Even the whole surface will appear some pits, in order to improve the fatigue life of the surface, we must make rational use of them.
本文由雙組份打膠機廠家友情奉獻.更多有關的知識請點擊:http://www.xyspace.net我們將用的技術、真誠的態度，為您提供為全面的服務。更多有關的知識我們將會陸續向大家奉獻，敬請期待！
This article is dedicated by the two-component glue machine manufacturer. For more information, please click: http://www.xyspace.net. We will use advanced technology and sincere attitude to provide you with comprehensive services. More relevant knowledge will be contributed to you one after another. Please look forward to it!