雙層中空玻璃起霧的原因和處理辦法
Causes and treatment of fog in double deck insulating glass
窗戶是在裝求學中特別重要的部分，不僅能起到抗風擋雨的作用，還能對房子起到隔音保溫作用。所以，在進行窗戶的裝修時，越來越多的人會運用雙層中空玻璃窗，但是雙層玻璃窗起霧怎么辦呢？
Window is a very important part of decoration and study, not only can play a role in wind and rain protection, but also play a sound insulation and insulation of the house. Therefore, in the decoration of windows, more and more people will use double-layer hollow glass windows, but double-layer glass window fog how to do?
中空玻璃起霧的處理方法
Treatment of fog in insulating glass
1.若是因密封膠未封緊密而形成的中空玻璃起霧的現象，則可將中空玻璃上的密封膠用東西撤除，并從頭將玻璃窗清洗干凈，待其枯燥后，再進行玻璃密封膠的涂刷工藝。
1. If the sealing glue is not tightly sealed, the sealing glue on the hollow glass can be removed with something, and the glass window can be cleaned from the head, and then the glass sealant brushing process can be carried out after it is dry.
2.若雙層中空玻璃窗的水槽方位未裝置好，則要將中空玻璃窗撤除掉，并進行從頭裝置。
2. If the flume position of the double-layer hollow glass window is not well installed, the hollow glass window should be removed and installed from scratch.
3.若雙層中空玻璃中隔條已裝置好，則可在雙層玻璃窗上增加玻璃墊片。另外還能夠將其上原有的中隔條除掉，在從頭裝置上隔條，要注意隔條的張貼方位要與玻璃窗的邊際部分保持必定的間距，一般是2mm為適宜。且在裝置玻璃窗時，要注意不要在隔條上沾上水，避免影響其的裝置質量。若是溫差相差過大而引起的起霧現象，則可將窗戶翻開一會，讓室表里的溫差的距離變小，待其的上霧氣散去停止。
3. if double insulating glass septum is installed, glass gaskets can be added to double glazing. In addition, it can also be removed from the original separator, separator from the scratch device, pay attention to the location of the separator to maintain a certain distance with the edge of the glass window, generally 2 mm is the most appropriate. And when installing glass windows, be careful not to put water on the septum, so as to avoid affecting the quality of the device. If the temperature difference is too large and caused fog phenomenon, you can open the window for a while, so that the room surface temperature difference between the distance becomes smaller, until the fog dispersed to stop.

中空玻璃起霧原因
Causes of fog in insulating glass
1.中空玻璃窗在裝置時，其的施工工藝欠安，在運用必定的時刻后，其中的密封膠發作開裂的現象，導致水汽進入中空玻璃的夾層中，隨著溫度的升高，水汽蒸發，在與玻璃面觸摸時，變為小型的水珠，然后導致雙層玻璃起霧的現象。
1. The construction technology of the hollow glass window is unsafe when it is installed. At certain time of operation, the sealant cracks, causing water vapor to enter the interlayer of the hollow glass. With the increase of temperature, the vapor evaporates, becomes small droplets when touching the glass surface, and then causes the fog of the double-layer glass. Phenomenon.
2.雙層中空玻璃在裝置時，因為里邊的水槽未裝置好，導致他的水面高于型材，然后導致水流流入雙層玻璃的夾層中。在陽光的照射下，水蒸氣構成霧氣，然后形成雙層玻璃的起霧現象。
2. When the double-layer hollow glass is installed, because the inner flume is not installed properly, the water surface of the double-layer hollow glass is higher than the profile, and then the water flows into the double-layer glass sandwich. Under the sunlight, steam forms fog and then forms fog in double glazing.
3.中空玻璃在裝置時，假如隔條在進行張貼時，與玻璃的邊際處沒有留必定的縫隙，則其在于雨水觸摸時，會將雨水吸附到雙層玻璃上，然后導致雙層玻璃發作起霧的現象。若室內的溫度與室外的溫度相差過大，且其室內的空氣濕度過大，就會發作雙層玻璃起霧的現象。
3. Hollow glass in the device, if the partition in the paste, and the glass edge does not leave a certain gap, it is in the rain touch, the rain will be adsorbed to the double-layer glass, and then lead to double-layer glass fog phenomenon. If the temperature difference between indoor and outdoor is too large, and the indoor air humidity is too high, it will occur double-glazing fogging phenomenon.
濟南昌盛機械,對雙組份打膠機定做感興趣的朋友可以關注我們網站http://www.xyspace.net，更多精彩內容歡迎來電咨詢，謝謝！！
Jinan Changsheng Machinery, the two-component glue beater customized interested friends can pay attention to our website http://www.xyspace.net, more exciting content welcome to inquire, thank you!