不同的環境會打膠機嗎？中空玻璃的訂單也連續的添加，部分企業也開端策畫擴展規劃添加廠子的生產能力采購一些機械設備來替代人工操作。也連續有人在后臺問我關于雙組份打膠機的相關問題，今日小編在這里跟咱們介紹一下雙組份打膠機對環境場所的要求，以便咱們能夠做到心中有數。
Orders for hollow glass have also been added, and some companies have begun planning to expand production capacity by adding plants to purchase some mechanical equipment to replace manual operations. Some people have asked me about the two-component glue beater in the background. Today, Xiaobian is here to tell us about the requirements of the two-component glue beater on the environment, so that we can have a good idea.
臥式雙組份打膠機是怎樣一種設備它關于廠房車間的環境到底有什么要求?不少人對它不是很了解。縱然是人士，關于雙組份打膠機的了解，實踐上還僅僅停留在它的實踐用途上。不過，關于打膠機的了解，停留在它的運用層面現已很難得了。那么，臥式打膠機終究對車間廠房的環境有什么要求呢?
Horizontal two-component glue beater is what kind of equipment it has on earth about the workshop environment what requirements? Many people do not know it very well. Even if it is a professional, the understanding of the two-component glue beater, in practice, only stay in its practical use. However, it is hard to understand the glue machine at its operational level. Then, what is the requirement of the horizontal rubber beating machine for the environment of the workshop?

臥式打膠機不同于立式打膠機。立式打膠機關于廠房面積的要求比較高保存估計也要盡50平米的當地。而小型打膠機關于廠房面積的要求就要小很多了，僅僅需要缺乏10平米的當地就能夠寄存，主要的是由于設備體積小能夠任意擺放，不需要專門為打膠機騰出空間來寄存。打膠機關于地上平坦度的要求，這個也是近期我廠參與北京世界玻璃展覽會是被問道多的問題。小型臥式打膠機關于地上的平坦度要求不是十分高，設備在初研制階段咱們的工程師現已考慮到地上平坦度的問題了所以在研制的過程中也側重的處理這個問題。咱們在設備傍邊專門添加了一個特別裝置來處理地上不平坦對打膠機打膠的影響。當然小編這也要著重一下盡管設備對地上的平坦度要求不高，但是也不能滿地是坑坑洼洼的。
Horizontal rubber beating machine is different from vertical rubber beating machine. Vertical glue machine on the factory area requirements are relatively high, preservation is estimated to be as much as 50 square meters of local. And the small glue machine in the workshop area requirements will be much smaller, just need to lack 10 square meters of local can be deposited, the main reason is that the equipment is small in size can be placed arbitrarily, do not need to make room for the glue machine to deposit. The requirement of the smoothness of the gluing machine on the ground is also the most frequently asked question for our factory to participate in the Beijing World Glass Exhibition recently. The flatness requirement of the small horizontal glue beater on the ground is not very high. Our engineers have considered the flatness of the ground in the initial development stage of the equipment, so they also focus on dealing with this problem in the development process. We have added a special device to the side of the equipment to deal with the impact of unevenness on the glue beater. Of course, it is also important to note that although the equipment on the ground flatness requirements are not high, but also can not be full of pits and holes.
打膠機關于廠房溫度、濕度的要求，作為設備來講打膠機自身關于廠房的溫度要求不高，一般應安裝在干燥、無粉塵、無腐蝕性氣體,溫度在0～40度的車間內。同其他設備的要求幾乎沒有什么太大的差異。
Glue beater in the plant temperature, humidity requirements, as equipment, glue beater itself on the plant temperature requirements are not high, generally should be installed in dry, dust-free, non-corrosive gas, temperature in the workshop of 0-40 degrees. There is hardly much difference with the requirements of other devices.

（）文章由雙組份打膠機編寫，更多雙組份打膠機資訊歡迎關注我們 http://www.xyspace.net）